|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
To be honest, I think that ANY stereo system gets in the way of the music - regardless of the amount of channels.Let us jump back to the monaural records/radio years. At that time, we had one choice and were very satisfied in being able to play back ...
|
|
Looks to me like the horizontal and vertical steps in the waveform are due to the diode switching. One diode turns off while the other turns on. Storage time on the diodes is normally short. But it depends on the test setup! T...
|
|
What about a 3 position switch?1. Direct connection between the anode and the B+2. Connection trough a suitable resistor for a gentle turn on/off.3. Completely disconnected.Just remember to turn on and off the heaters at the right times in the on-off...
|
|
This year is the first winter that I live with this new listening room. Last winter the playback was up and I still was playing with minor arrangements of my ULF channels, cable and a few other things. For many months I do pretty much nothing with my...
|
|
Are you sure the remodeling didn't do it? I assume you mean you moved it back into the remodeled room.One time some years ago I was in a recording studio and wanted to use my Millenia mic preamp into the ADC. So I asked them to turn off the mixing bo...
|
|
[quote user="Ciampa"]Good anoon everyone,I am currently running an RY-5500/RX-5000 trough aramid thread. Was wondering wht wd be the ideal thread tension for the system. Wd it be better being tight or loose ? Both cases I get constant platter speed, ...
|
|
CORRECT AC POLARITY
June 17, 2009 — puristaudio System set-up
"I wanted to talk about a tweak that costs little or nothing to do, while having the potential of paying big dividends in terms of sonic improvement. It involves a ...
|
|
Since I installed the 3 of PP2000 units they do work wonderfully. Since my days 2-3 years back when a turn of power switch on PP1500 required to dress in bomb-squad outfit and when any switching might be the very last switching, I kind of have th...
|
|
I have a 10KVA Isolation transformer that feeds on two separate 8 ga cables running direct from the house meters into an breaker into de transformer. This breaker is the one I use to turn my system on and off. The Isolation transformer recieves two ...
|
|
PFC is a function of adding Xc using capacitors to bring the current in the circuit downwards.What you have is an inductive load giving a lagging PF eg a simple motor gives a PF of 0.85.Thus the inductive element can be manipulated to bring it from l...
|
|
kodomo , I would like to make some comments about your response.
The presumption that the mic was exact
in the listening spot and the drivers are time-aligned and run “in-phase”. If
any of the above conditions are not true then all bets are off a...
|
|
My backup strategy is kind simple. I have another box filled with hard disk to where I copy data using Beyond Compare. I have also some automation scripts that synchronize some drives between my DAW, my working development machines with the drive...
|
|
Peter, I do not know what is doing in with AM, I do not use it and all my experiments are in FM range. You might do the following: take FM antenna out of tuner and use instead a few cm of local wire. Defeat the noise causation on Sansui and run the t...
|
|
Agree completely. In addition I am always leery of having electrical components cycling on and off just from a reliability and longevity standpoint. Turn it on and leave it on unless there are tubes....
|
|
Considering that Srajan is the ultimate audio reviewer, it should be clear to all that there is no opinion worth considering in that article.Where is the cone area to recreate anything except a fart? How is any type of low distortion HF possible with...
|
|
Uni,There is a Bruckner Motet in that stained glass I posted. You will have to turn off the amplifiers to hear it. Listen to the space with that glass in it. Don't you hear the Bruckner's contrapuntal modes loading the room? You don't need a sound to...
|
|
That may halfway-explain my reaction to the performance. Despite the 1st level listening being remarkable with the live broadcast, I had to fight myself not to turn it off...I would have thought you would be fan of sym. 11 (kondrachine conductin...
|
|
Hi Romy,I listened to the bigger brothers of this last weekend. The first smps amps I have heard that I didn't need to turn off straight away. Certainly cool running with plenty of power. It wouldn't replace your valve amps but might be entertaining ...
|
|
Recently, I added JBL 2220 for below 200 and replaced TOA DSP with Pioneer D-23 4way active crossover. The result is very positive, but there are still many issues I'd like to attend.I'll be out of country early in September so that'll be a goo...
|
|
Looking around quickly, it appears that it takes about 2 hp to generate 1,000VAC. Around these parts, this probably means a 3-phase 220V electric driver motor, which would totally pollute the entire house electrical system that drives it, ...
|
|
I have been fighting the electricity and getting off-track enough to find it wearying, not to mention the silliness with the tubes. The other day I happened to drop a double album and it hit dead flat on the carpeted floor. The mute was of...
|
|
Oh, no, I’m absolutely not going to go to this route. I absolutely certainly do not want to have any vacuum tubes in there, not kneeboard and mouse, no recording options, not switching or commutating, it need to have one single button to tune of and...
|
|
While I, waken up by Mani’s idea to us MP as the only DAC, was playing with new Pacific I have researched deeper the HDCD subject in the BSO recordings. Mark Donahu, from AudioMirror with his slightly patronizing attitude might consider himself a...
|
|
I see the point, thanks a lot for your comments. Playing with the phono I've somehow come to a conlusion (possibly wrong) that my ham is an electrostatic air pick-up from the PS. During the operation both PS and signal boxes are very closetogether an...
|
|
I figured you had a good reason for going with 88.2. I have already re-assembled everything for playback. Tomorrow I will put it back for recording and do a 24/88 recording the same way I did the previous one. It will be interesting for me anyway ...
|
|
Dear Romy, advice that I received from Lavry regarding heavy use (6 hours each day) of the DA924 was as follows: "If you really use it that much I would leave it ON but power cycle it one a week. If you don't plan on using if for about 3 days then yo...
|
|
Amir, I agree with you wholeheartedly, on a philosophical level, and this in turn underpins my overview of life, art, etc.But, in practical terms, the fractioning off of any "event" is certain, once we try to "reconstruct" that event.Basically, any a...
|
|
**I think the Insteon $70 controller + optional software will allow you to turn on and off a 120VAC line via internet. The second link has a video and instructions for using the Insteon for a lighting application, and also some software comments Inte...
|
|
I think DP-777 sounds best when i turn off it's Jitter correction and i use bit Perfect I mode in 16bit 44.1khz mode.I think AMR DP-777 is very very good DAC but in my idea it is a-little bold sounding if i criticize tone.It sounds clear , very clear...
|
|
[quote user="manisandher"] The last I heard from him, he was looking into how to get the clock frequency doubled, maybe by an external device (I think).[/quote] I do not like this idea. The frequency doublers are a very simple but it would need PS a...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2026
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
0 |
|
 |
|
|
Total human visitors: |
64,570,065 |
|
|
|
|
|
|