|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
Stefano Bertoncello from Italy posted at his blog an article about Nimbus’ techniques to play old 78s.
http://twogoodears.blogspot.com/2010/02/nimbus-prima-voce-series.html
http://www.wyastone.co.uk/nrl/pv_transfer.html
...
|
[quote user="coops"]Just a quick note ,I went over to Germany and listened to a pair of Cessaro Alpha's at the home of TW Acoustic's Thomas Woschnick, I thought them absolutely superb, far more 'real' than any other speaker I have heard, ( impossible...
|
Here is where I stay with my enigmatic Remedios project. I build inside of top box at resonator that I tuned 50-60 hertz. So basically it is under two square foot enclosure with a port tune at the bottom of resonance frequency. The port is shooting ...
|
***Here we go! What an accomplishment! I wonder if the Lyra cartridges sound so gray and so boring because of this “accomplishment” or there is any other reasons.***I knew that the reference to his high gain Connoisseur phono stages is coming.Self-pr...
|
Hmmm... Now I have something else to play with. Next time I am set up to record I will make yet another pass at firebird with the Tascam set to 88.2 so I can see if I can hear any degradation in my downsamped 88.2 file. I wonder if some converters...
|
On the topic of string slippage: I don't think my string, the original one from MS by the way, slips at all once the platter is up to speed. It would slip on the motor pulley when first turned on, as the heavy platter must be gradually brought up to ...
|
... to pass data unchanged.I've been ripping my CDs (using EAC and a Plextor CD-ROM drive) for about 4 years now. I use Foobar with ASIO (and now with WASAPI also) as the software player, loaded onto a Sony laptop. The soundcard is an RME FF800.Now t...
|
The best midrange comes from compression drivers, it has that minuteness, transparency and dynamics that no other topology can offer; the main problem with them is that they only cover a very specific mid frequency ran...
|
I am not a huge fun of S3 for MF use as the ceramic magnet is less interesting then alnico magnet for HF applications. For the low mid, or as I call it the Fundamental Channels the HF problem that ceramic has do not manifest themselves. My Fundamenta...
|
Bill, the result you or anybody else gets with resonating surface of the horn if NOT what I was talking about. You and Jessie recognized in what I was saying some specific problems of your horn but those problem are from very different reason. The t...
|
Hi, WojtekI get lots of PM from readers of this site; it should work. Try again, and be careful with the spelling, etc. Though I can easily upload pictures to GSC Image Gallery, I can't seem to get them from the Gallery to the Board. Perhaps they ...
|
Romy,In response to your response to what I did not say but implied....I decided to put the question here instead, where the light of enquirey might shine upon several different facets of investigation.Firstly, I'm still interested to know if you are...
|
N-set, you may remember that from the beginning I encouraged you to try a wall mount, for all the reasons you have just cited, and this approach seems even more obvious if the walls are concrete/masonry vs. floor joists and sheet subflooring, not to ...
|
Sorry for posting a bit of kindergarten trivialities but maybe someone without a dedicated line yet will find it motivating.I've finally connected my dedicated lines which took me ages. The lines are connected right behind the power meterand have the...
|
Ok, I completely disassembled one of the Super Milqs and physically injected extra 3 channels. It looks like everything is all right real-estate wise, still I would prefer of course to have more space….
As now the amp is completely shattered ...
|
This thread has been pretty interesting overall. I've read most of it and would at least like to provide some feedback on the technical side of designing with the 45 and 2A3 DHTs... at least from my personal experience. A few years back I decid...
|
Antonio,Works just fine with ported, unported or open baffle. The process works on the boundary layer of the cone. This is the very thin area between cone material and air. The actual mechanism just disallows energy trapped in this zone from reflecti...
|
A few years ago somebody, I think it was “drdna” from California, told that he has a habit to listen the mechanical noise of the tube hold the tube at his ear by hitting the balloon of the tube. I did not exactly acknowledge it at that time as it was...
|
Angelo, I do not think this site add anything applied to the subject. I personally do not feel that upper bass horns require any phase plugs; quite in contrary they are dreadful for upper bass horns. When a straight horn employed then the horn does n...
|
[quote user="skushino"] Romy, I now see you were asking a totally different question. [/quote]Disconnect tweeter and woofer and connect juts MF channel with 3uF and upperbass channel with whatever low pass you wiling to use. Listen music on thi...
|
It is a good question that I also asked when I saw this speaker. Afterall, everything being equal using the same materials for the drivers is more optimal from a coloration standpoint. My guess is cost. They already had splurged for...
|
Hi Roman... you know "... but Twogoodears normally prefer a do not go to depth..." it's not an hide & seek kind-of-thing, but a necessity;-), as I'm not technical inclined or taught enough to discuss in depth of circuits designing... I'm only a u...
|
Paul, 100% agreed on the real world test vs all other mental exercises!!!Not sure on what do you mean by the "follower"?Yes, I need only 2 stages, perhaps TVC at the input. I'll even have a bit too much gain, if I'm correct.Romy style bias on 6E5P an...
|
Hi Romy,So it is time to think about the bass output transformer in my DSET. My bass channel will be 8 x 25W/8565-00 each side set in a sealed box and will cover the frequency range below say 100Hz. These drivers can be wired anywhere between 1R an...
|
Ok; there's a mis-print somewhere, or a manufacturing change... The web site linked listed SG-370 as 23,000 gauss, and SG-370DX as 24,000 gauss. The goto brochure lists SG-370 as 24,000 gauss. And was discussed yesterday w/ someone, one doesn't re...
|
[quote user="Romy the Cat"]
It is very self-explanatory and liked it a lot. The advantage is that it might be used in any rectangular room and the most important that it is VERY simple to build this way. I think that if I have room then I might sto...
|
[quote user="haralanov"]…. acoustic filter does not rotate electrical phase of the signal. [/quote] I do not think it is correct. The rotation of electrical phase is not the subject of filtration method but subject of slop and Q. Of you write the sam...
|
Thanks The CatI'm posting the pics of the build as I progress so people can see and pass on ideas, that's all. Are you suggesting you don't want horn projects shown on your site? I had earlier outlined the design, including cross-over points etc.I as...
|
Hi all, I have a t350 horn that I recently got out of an old cabinet at a junk shop which does not work. If I connect it to my Marantz 1030 amp it will only play very faintly as if you are listening to cheap earphones laying on...
|
Romy, You make all very good points. I probably shouldn't call the front of the driver a phasing plug, because actually the long wavelengths really don't care much about the shape of the exit, they will just pass right through...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
0 |
|
|
|
Total human visitors: |
42,769,571 |
|
|
|
|
|
|