Rerurn to Romy the Cat's Site


In the Forum: Audio Discussions
In the Thread: It’s mad, mad, mad... electricity.
Post Subject: Different types of loadPosted by Amir on: 7/31/2022
---------------------------------------------------   common internet information :
it seems UPS/inverters/ACRegenarators react different to different loads .PSU design affect on load characteristics and not all AC regenerators are good for specific type of load.it means if the AC regenerator not be quite Match for specific PSU then the "more power" will not give us better sound.
            
https://power-backup.ro/wp-content/uploads/2018/04/White_Paper_Power_factor_UPS.pdf"A UPS will be called upon to support different types of load equipment and these may have nonlinear input stages. The compatibility of the UPS output stage (ie, the inverter) with different types of nonlinear load equipment is usually stated in the product documentation. If not, it must be checked with the manufacturer directly. Note that:"--------------------------------------------------
I know pure power 3000 is good for most under 800w systems but finding a AC solution for over 1000w is my challenge.it seems only "higher power" will not give us good result and the PSU design is important for choosing UPS.
the question is do you have any experience with high power UPS like APC or "Victron Energy" or ABB?if there is more please share
thank you

Rerurn to Romy the Cat's Site