Rerurn to Romy the Cat's Site


In the Forum: Melquiades Amplifier
In the Thread: Valve Preamplifier for Macondo/DSET
Post Subject: Do not ask me how I know it.Posted by Romy the Cat on: 8/26/2020
I do not know how about 5dB attenuation via cable but for sure cables sound very different. Hey you are talking to a person who have a small fortune spent for wiring my entire system with vintage Dominos and I never felt that it was waste of money. There is so much talk about cables that I do not want to pollute this thread with this subject. I do feel that it is a bit to early for you to worry about cable and you need to setup the major game strategy and then wary about the dribbling. BTW, be advised that the configuration of your system permits you to do some very interesting things in term of cabling. You for instance might DC bias the cables with DC voltage that is very positive impact some of the cables. All you need to do is juts to shut down the positive bios supply and do not set 0VDC at impute.  As the preamp is connected the ultra-low Zout of the preamp will ground the negative bios voltage to ground via the 400K grid-bias resistor. This will generate the proper negative bias for the driver tube and the DC voltage will be flowing over your interconnect to preamps output. Very cook configuration. Do not disconnect your interconnects in this configuration while your amp is work as you will be baying need drivers for your speakers and new windows for you house. Do not ask me how I know it.

Rerurn to Romy the Cat's Site