Rerurn to Romy the Cat's Site

Horn-Loaded Speakers
Topic: Wave propagation simu

Page 1 of 1 (6 items)


Posted by el`Ol on 10-29-2007
Hello all!

Some people call omnidirectional spekers "Hallsoßenwerfer" (reverb sauce throwers), some people even accept price and sensitivity of an MBL 101. While I find the MBL too diffuse, I still find there is something special about a speaker being radial. In my experiments with fullrange drivers placed at the height of my ears I found they have to face the ceiling very close to 90° to produce that magical image, so it`s not just the ratio of direct and reflected sound, but there has to be something about being radial.
My attempt to explain this is the following: In a pistonic direct radiator there is not only more beaming in the higher frequencies, but also the center of the wavefront is moving backwards, resulting in a different wavefront radius at the listening position, which results in different interaural time delays.
My question: Is it sufficient for a horn to have constant directivity in order to have constant wavefront center over its frequency range, or how else would a "constant wavefront center horn" have to look like?


Regards,
Oliver

Posted by CO on 10-30-2007
Hello el`Ol

Can you better describe "the center of the wavefront is moving backwards" ? You mean the sound wraps around the speaker differently dependent on the wavelength compared to the baffle ratio i think ?

This is also true for horns (not only for constant directivity) only this point is much lower in frequency dependent on the mouth area and i think is mainly out of the usable bandwidth.

Gr, Collin

Posted by el`Ol on 10-30-2007
I mean for low frequencies that radiate omnidirectionally the wavefront center estimated from the wavefront curving at a point a bit away from the speaker would in fact be the center of the cone. For the more beaming frequencies it would be estimated behind.

Posted by CO on 10-31-2007

The speed of the soundwave coming towards you will not change even if the lower frequencies are more omnidirectional so there will be no shift.

The SPL of these different frequencies will change though depending on distance because of this effect.

That’s why low and mid drivers ‘need’ reinforcement from the walls in a traditional loudspeaker arrangement.

So speakers are made to be listened to at certain listening distance. Wall reflections also have a large influence on the sound because they receive mainly off-axis sound which has less high frequency content.

Rgs, Collin

Posted by el`Ol on 11-02-2007
Here is a simulator for wave propagation:
http://www.falstad.com/ripple/
Choose setup = single slit.
Select mouse = edit walls.
Broaden the slit.
See what happens in the far field if you change the source frequency.
The simu is not high quality, but I believe to see that the wavefront is less curved for higher frequencies.

Posted by CO on 11-05-2007
Hi Oliver,

Thie single slit model is definitely not the correct model to be judging these effects. Even the other model baffled piston is iffy.

Rgds, Collin

Page 1 of 1 (6 items)